---

SIEMENS SGT 600 DLE - Complete CCPP - 35 MW - Ref : P/AA-87-31.3 -4



1 Set - Siemens SGT 600 DLE,year:2011,Hours:553,Fuel:NG,10.5 KV ,50 Hz ,Dry Low Emission - Complete CCPP



Scope:Siemens turbine+gearbox+generator+HRSG+cooler+lube+Sound-Proof+control+Steam turbine+steam turbine generator+high volt cabinet+low volt cabinet+mcc+transformer



Total Power : 25+10 = 35 MW



Siemens GAS Turbine



Model:SGT600DLE



Dual Shafts



Emission type:DLE(Dry Low Emission)



Made in SWEDEN



Power Turbine speed:7759rpm



Equiv.Working hours:553



Number of start:52 times



Total Service time:374



Equiv Operating Cycles:58



Fuel:Dual(Natural Gas),



(Gearbox Ratio:5.172,speed:7759rpm down to 1500rpm,alternator speed:1500rpm )



Quantity of Shafts:Dual Shafts(may drive for compressor)



scope of supply:



1-High Pressure Compressor,2-Combustor,3-High Pressure PT,4-PT,



5-GearBox(Voith),6-Alternator(ABB),7-Gas control part,8-Control room,9-Recovery Heat Boiler



10-Original manual book,11-Chimney,12-Transformer,13-Dryer,15-Fans,16-Airconditionr,17-Control boxes



18-Control computer,19-Cable,20-Lube system,20-some new spare parts



Maintenance record:



a-The maintenance mainly involves passing hot air from the dryer to the combustion chamber. We have previously tried turning the dryer. Desiccant is placed inside the steam drum of the waste heat boiler.



b-The last run was in December 2017, and it was started every three months for about a year. Finally, we communicated with Siemens to adopt a long-term maintenance method, so we did not attempt to ignite again.



Price : USD 15,500,000 FOB Shanghai , China



HIGHLY SUITABLE FOR DATA CENTRE POWER PLANTS , QUICK INSTALLATION TIME 6-7 MONTHS AFTER ADVANCE PAYMENT .



NO NEED TO WAIT FOR 30 Months FROM OEM



Immediate Delivery



LOI / POF is required for further details



Inspection : Can be arranged subject to Refundable Deposit



Once again a client convinced us to waver any deposit and cost of inspection using what we now know was a fake POF, despite assuring us they were the end buyer and RWA to purchase , they were after all broker and NOT the buyer. They visited the plant costing considerable expense, time and effort right on Xmas, took photos for his web site or Linkedin and now are not able to bring the funds.



This will have been the LAST time an inspection without deposit into escrow and the cost of inspecting will be approved.



So in future if you require inspection the following is set in STONE !!



Do NOT ask for inspection should you not agree ;



Always first step is LOI this must confirm acceptance of the price contingent on inspection and the end user country destination since most vendors are strict on where these will be installed.

A verifiable POF or BCL is needed with bankers correspondence details which will be verified this can of course be submitted to escrow.

Once received we can reconfirm if still aircraft remains available.

Once confirmed we will open escrow and buyer must make a minimum 10% deposit, this is refundable if the plant is not as presented.

As soon as deposit is made inspection can be arranged. On all inspections the buyer MUST be accompanied by our staff and the cost for them to fly, hotel and out of pocket is Euro 10,000 / USD12,000 this must be paid and is also deducted from cost of the aircraft IF the sale proceeds if the sale fails this amount is not refundable. This procedure will sort out the genuine buyers from the fake.

We will not operate again as a travel guide or free introductory service

---

---

---

---

---