---

34000 KW Little Used Kawasaki Gas Turbine Power Plant



Reportedly very little used 34000 kW Kawasaki Gas Turbine Power Plant.

Manufacturer: Kawasaki (Japan)

Manufacturing year: August, 2020

Type: Co-Generation



Still in operation, new in 2020, commercial operation starts in 08/2021, to be shut down at 03/2024. Operating hours 13,298 hours was at 16:00 on May 25, 2023. Expecting total operation hours to 03, 2024 to be around 20,000 hours. There is a steam generator (boiler) that produces steam using exhaust gas. Steam product: 31.2 tph at 7 MPaG, 9 tph at 1.6MPaG, last maintenance was in March, 2023, number of start-up: 66 times.



a. Gas Turbine

Manufacturer: Kawasaki (Japan)

Manufacturing year: August 2020

Condition: little used

Model: L30A

Fuel: Gas

Electric Output(kWe): 34MW

Type: Simple open cycle, Two-shaft

Compressor: Axial flow 14-stage

Combustor: 8-can

RPM: 5576

Pressure ratio 24.5

Exhaust gas temperature: 502 °C

Heat rate: 8930(Kj/kW-hr)

Exhaust gas mass flow: 333.3(x 1000kg/h)

LHV of Fuel: 35.9(MJ/Nm3)

Thermal efficiency: 41.2%

Heat recovery efficiency: 46.1%

Total LHV thermal efficiency: 85.5%

Overhaul intervals: 6 years

Required space for Turbine system +Alternator system: approx. 11m x 25m x11m (Maximum height of air inlet)

Eco-friendly low NOx emissions: NOx reduction method: DLE (Dry Low Emission), NOx: 15 ppm(15%=O2), Operating range of DLE (Dry Low Emission): 70~100%



b. Alternator

Manufacturer: Meiden (Japan)

Manufacturing year: 2020

Condition: A little used

Type: Synchronous

Rated power: 37,945kVA

Rated current: 1992A

RPM: 1800

Voltage: 11,000 V

Frequency: 60 Hz

Phase: 3

Poles: 4

Power factor: 0.90

Field Voltage: 128V

Field Current: 598A

Weight: 83 ton

Required cooling water: 160m3/h

Lubricant: 110L/min

Weight: approx.84ton



c. Steam Absorption Chiller

Manufacturer: FCO Kawasaki (Japan)

Manufacturing year: August, 2020

Cooling capacity: 2462kW

Cold water flow rate: 423.4m3/h

Outlet temperature: 7°C

Cooling water flow rate: 700m3/h

Inlet temperature: 32°C

Maximum steam consumption: 2695kg/h

Steam inlet pressure: 0.785MPa (Gauge)

Power: 440V, 60HZ



Price: $8,900,000.00 USD

As is, Where is USA

#perry

---

---

---