---

2 EACH low hour REBUILT GE LM-6000 PC SPRINT

YOM 2002

Hours before overhaul 27,000

Recent overhaul on Turbines

Hours since overhaul approx. 2,000

Total price per unit- $22,950,000.00



GAS TURBINE With Sprint Power Boost

FUEL:: GAS Fuel

POWER OUTPUT: 47,300 KW @ ISO

MANUFACTURES GUARANTEED HEAT RATE OF - 8200 BTU/ kWh_

EMISSIONS GUARANTEE, WATER INJECTION:

NOx.....25ppmvd @ 15 % O2

GENERATOR: Brush 71.2 MVA, 60 HERTZ, 13.8 KV

COMPUTE WITH ALL NOTED Auxiliaries: (ATTACHED)

NEW LM6000 SPRINT GAS TURBINE GEN SET ::

I. SCOPE OF SUPPLY

For a detailed description of the basic and optional scope of supply please refer to the

accompanying Product Specification manual.

A. BASIC SCOPE OF SUPPLY

The following equipment and services are included in the basic scope of supply:

· LM6000 gas turbine engine equipped with inlet bell-mouth and screen.

? GAS fuel, water injected combustion system, complete and self-contained on the unit,

with connection on the baseplate for customers filtered, regulated fuel supply at 625

psig ± 20 psig.

· Generator, 13,800 Volt, 60 Hz, 3600 RPM. Low maintenance brushless excitation system

suitable for Class I, Group D, Div 2 areas. Neutral and line cubicles with CTs, surge protectors

and lightning arrestors.

· SPRINT (Spray Intercooling) power augmentation option.

· I-beam baseplates for turbine, generator and unit mounted accessories.

· Acoustic enclosure for gas turbine and generator.

· Redundant ventilation systems and AC internal lighting.

· Multi stage air inlet filtration system for both gas turbine and generator, including:

weather hoods, inlet screen, pre-filter, final barrier filter, intake silencer, and

standard ducting to plenum chamber. Filter house ladders and platforms are included.

· Electro-hydraulic start system.

· Separate oil systems for gas turbine and generator, including duplex filters, duplex water/oil

coolers, stainless steel piping, and stainless-steel reservoirs.

· Unit control panel for indoor mounting in a controlled environment, including microprocessor

fuel management and sequencing system, generator metering, Bentley Nevada vibration

monitoring, CRT annunciation of alarms and shutdowns, and Ethernet/Modbus interface to

customer’s DCS.

· I/O cubicle mounted on gas turbine enclosure.

· 24V DC control system battery with dual battery chargers.

· Fire and gas detection and extinguishing system, serving both turbine and generator

compartments,

· “Soak wash” system for simple cycle service.

· Generator factory testing to IEEE or IEC standards. Gas turbine performance test by : G.E.;

full load string test and performance verification of turbine generator set at S&S factory

(Houston). load string tested

· Six sets of drawing and data packages, O & M manuals.

See additional project specific details in “Scope of Supply” section.

II. EXCLUSIONS

The items listed below are excluded from our offering. Any other equipment or services not

described in the written proposal are also excluded.

- Fuel, fluids and chemicals

- Fuel storage tanks and forwarding equipment

- Water treatment and purification equipment

- Deaeration and chemical injection equipment



- Heat recovery boiler

- Boiler feed pump and auto level control assembly

- Automatic blowdown controls

- Absorption chiller and chilled water supply system

- Buildings, foundations and foundation embedment’s

- Filter house support structure other than standard

- High voltage transformer(s), switchgear and associated equipment

- Distributed plant control or remote-control panels

- Balance of plant and energy optimization controls

- Desuperheater equipment

- Steam turbine generator set

- Steam turbine condenser and condensate pumping equipment

- Cooling tower and circulating water system

- Interconnecting piping, conduit, and wiring between equipment modules

- Power plant calibration tools and ordinary hand tools

- Off loading of equipment at jobsite

- Yard light and fences

- Spare parts other than start-up spares

- Supervision or technical direction at jobsite

TERMS AND CONDITIONS OF SALE

This proposal is based on the following terms and conditions.

Inspection: Immediately

Purchase: Immediately

Delivery: IMMEDIATELY UPON PAYMENT.

Freight: EX. US Site

Warranty: TBA

#blackhi

---

---

---